Warrior Samurai V2 9500lb High Speed Next Generation Winch
The Warrior Samurai just got even better with an unbeatable line speed of 69ft per minute. Getting the job done quickly and easily, the V2 next-generation winch is now available in a high-speed model.
Keeping the same high speculation with a super-charged line speed, this winch has a line capacity of 9500LB or 4500KG to get the job done with ease.
As well as its super speed, this upgraded Warrior winch features a high-quality wound motor with brass contacts going direct to the motor for efficient running. Also boasting a heavy-duty waterproof solenoid, double sealed drum, and full steel planetary gearing that runs quietly to keep the peace. Whether you opt for the Stainless Steel 4 Way Fairleads or Aluminium Fairlead (Synthetic Rope), the Warrior Samurai V2 winch provides unbeatable power.
But the stand-out feature is the addition of a revolutionary new external braking system. Unlike standard winch brakes, the V2 Samurai brake is at the end of the gearbox rather than inside the drum. Making it even faster with a lower amp draw and higher capacity for load holding and lowering – the benefits are numerous. Also reducing heat build-up around the drum, making it extra safe to use with synthetic rope.
Backed up with a limited lifetime warranty and 3 years of electrical cover; trust in Warrior power.
♦ Line Capacity: 9,500lb (4,500kg)
♦ Motor: Series Wound Motor - Powers In and Out
♦ Gearbox: Freespooling Clutch - Allows cable to be unwound manually
♦ Warranty: Limited Lifetime Warranty with 3 Year Electrical Cover
♦ Wired Hand Control: 3.8m Wired Hand Control
♦ Wireless Control - 12V MODEL ONLY: Pre-Installed Heavy Duty Wireless Control with Lanyard (See note below)
♦ Mounting Plate: Available as optional extra
♦ Mounting Bolts: Included for Standard installations
The wireless control supplied with this winch is intended for use in Leisure and Non Commercial applications only.
For commercial and industrial applications we would recommend fitting the Warrior Centurian control.
♦ 1.5m Heavy Duty Battery Cables (May need extending dependent on application)
♦ Battery Isolation Switch (Failure to fit will invalidate warranty)
♦ Instruction Manual
♦ Dimensions: 593mm L x 160mm D x 248mm H
♦ Mounting Bolt Pattern: 254mm x 114.3mm
♦ Line Pull - No Load: 12 m/min (40 Amps)
♦ Line Pull - Full Load: 3 m/min (280 Amps)
Whilst every effort has been made to ensure accuracy of information relating to this product, in the interest of technical improvement this specification may be altered without notice.